-Stretch panels on the side for comfort and fit
-Extra zippers which allows you to fasten the liner to the trench coat
-Two way front zipper
-Two side pockets, 1 chest pocket
-Elastic bands on the inside of the coat to attach around your thighs to avoid the coat from flapping in the wind.
Fabric: light weight and soft Ripstop nylon, front and back panels. The panels are insulated with wool from lavalan, a company based in Germany. The side panels are a polyester fleece.
100% Nylon, Shiny Ripstop + 95% Polyester, 5% Elastane
100% Nylon, Shiny Ripstop
Lavalan Sport Virgin wool, 82% Virgin Wool, 18% PolylactideBody: 120gsm, Sleeve: 90gsm
Uhips zippers are of high quality and they will sustain if you use them with care. make sure you assemble the two-way properly before you zip up.
Washing: Gentle Wool wash at 30 degrees C
Pull the upper slider down, until it touches the bottom slider.
Insert the separable pin to the very bottom of the bottom slider. (Incomplete insertion may cause problems.)
Pull the upper slider up with your hand.
Pull the slider down completely, until it touches the bottom slider.
Gently pull out the separable pin with your hand.
The push buttons are designed to fullfill the garments functionality. We recomend you to un button them with care and avoid ripping them apart.
Sizing: True to size, eg 38=AU10, 40=AU12 Check out size chart under images
Please see size chart under images. Take tight measurements where you are the widest. You will have room for an extra layer under you coat/jacket if using this size chart.
The size of the liner is adjusted to fit the Trench coat and it is slightly shorter to fit under the coat. The size is designed to wear on top of a base layer or a thinner second layer.
Add https://www.horseinthebox.com.au/products/uhip-mid-length-waterproof-trench-coat?_pos=7&_sid=192b19817&_ss=r to create a waterproof warm jacket